The OxeDot requires a CR2032 battery. If there is no light when you press the OxeDot, change the battery by completing the following steps:
- Ensure the OxeDot is upright. The chevrons in the logo should be on the left side of the X and the back clip’s opening should be pointing down.
- Open the OxeDot by twisting the front portion of the device counterclockwise.
- Using a non-metallic object, slide the battery out and replace it with the + side facing away from the circuit board. NOTE: If there is a small clip blocking the battery from sliding out, gently lift the clip as you remove the battery. You can fold the clip slightly inward to prevent it from blocking the battery in the future.
- Close the OxeDot by connecting the front and back of the OxeDot and aligning the logo’s center to the left of the top center of the device (see image below) before twisting the front portion clockwise.
