Please read all instructions, safety information, and warnings before using your OxeFit XP1. It is the responsibility of the owner to ensure that all XP1 users are aware of warnings, precautions, and safety requirements. Failure to follow instructions and safety precautions may result in serious injury or death.
Improper use of this equipment may result in injury or death. OxeFit is not responsible for injuries, accidents, or damages caused by misuse of the equipment.
The OxeFit XP1 is not intended to diagnose, treat, cure, or prevent medical disorders or any conditions. Consult with your medical provider before starting a new workout plan.
Injuries may result if exercising improperly or excessively. It is recommended that all individuals consult a medical provider prior to commencing an exercise program. If at any time during exercise activities you feel faint, dizzy, or experience pain, stop exercising immediately and consult a physician.
Keep loose clothing, shoelaces, long hair, and accessories away from moving parts when the equipment is in use. Keep all observers, especially children and pets, away from moving cables and pulleys. Ensure others do not touch the machine when in use.
The XP1 is designed for use by individuals aged 18 and up. Keep those under the age of 16 away from the machine. If approved in advance by a physician, those aged 16 — 18 may use the XP1 under direct adult supervision. An adult should review all safety instructions with the minor prior to use. The XP1 contains parts, components, and functions that can cause severe injury or death. You are responsible for the safety of any children and other persons you allow to use your XP1.
Be cautious when stepping onto and off of the platform. Please wear appropriate non-slip footwear. DO NOT dismount from equipment while any of the cables are loaded. Press the QUIT or UNLOAD button to stop tension on cables.
Use reasonable care and safety precautions at all times while using the XP1, including resting, hydrating, and modifying any exercise as needed.
Ensure safety by checking for wear and damage regularly. Perform regular care and maintenance for optimal performance and longevity of the device. Discontinue use and contact OxeFit if the device is making unusual noises. Always unplug the device before cleaning.
Changes or modifications to this device not approved by OxeFit could void the warranty. DO NOT attempt to repair the XP1 on your own since this could affect its operation. Please contact OxeFit immediately for repairs.
Never use any accessories or equipment other than ones provided or approved by OxeFit. This includes dumbbells, weight plates, bands, chains, bars, or other means to increase the resistance force.
The XP1 is for indoor use only. DO NOT store the device outdoors, near water, or at high humidity levels. Metrics on the screen may be inaccurate and should be used as a reference only.
BEFORE USING THE XP1: Familiarize yourself with the emergency stop procedures and the location of the Emergency Stop buttons of the XP1 before use. Emergency Stop buttons are located on each side of the XP1. When pressed, all four motors controlling the cables will immediately release tension, and the motorized Adjustable Rack Arms will stop.
To reset, twist the Emergency Stop button 90º to the right (it will slightly pop outward) before pressing Restart.
WARNING: DO NOT push the Emergency Stop button when restarting the device.
EMERGENCY BRAKE RELEASE
BEFORE USING THE XP1: Familiarize yourself with the Emergency Release pull knob located on the back panel of the XP1. This knob is to be used when the Adjustable Rack Arms must be moved in an emergency situation and the buttons are not functional, or the emergency stop has been pressed. Pulling this knob will cause the Adjustable Rack Arms to slowly fall under their own weight and allow the rack to be manually lifted or pushed down.
After the rack has been moved and the system is ready for use again, push the knob back to its original position. The system must be power cycled for proper operation.
SAFETY RACK POSTS
BEFORE USING THE XP1: Familiarize yourself with the Safety Rack Posts. The Safety Rack Posts are designed for adjustable positions. Before bench pressing exercises, insert both Safety Rack Posts into the Floor Rack Posts located on the floor inserts of the XP1. Adjust the height of each Safety Rack Post as needed.
WARNING: Safety Rack Posts must be used when performing bench presses. Adjust Safety Rack Posts accordingly. DO NOT place Safety Rack Posts below the height of the sternum. ONLY perform bench pressing exercises from inside the XP1 framework. BE CERTAIN that the Safety Rack Posts are fully engaged before use.
ADJUSTABLE SAFETY RACK POST PINS
BEFORE USING THE XP1: Pull the spring-loaded pin knob to adjust the height of the Safety Rack Posts.
WARNING: Ensure the height adjustment pin knob is locked in place before operating your XP1 to avoid serious injury.
INSPECT YOUR XP1
BEFORE USING THE XP1: DO NOT use the device if it is damaged or contains worn or broken parts. Use only replacement parts supplied by OxeFit.
MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. Labels contain important information. If unreadable or missing, contact OxeFit for a replacement.
MAINTAIN ALL EQUIPMENT: Preventative maintenance is crucial to maintaining the function and safety of this equipment, as well as keeping the equipment in safe operating condition. Failure to conduct preventative maintenance by the owner may cause the equipment to operate in an unsafe manner. Equipment needs to be inspected and maintained at regular intervals.
Commercial Consumers: Your facility must follow written guidelines for preventative maintenance and keep written or online records of the maintenance performed on the XP1. Log in to the web portal to review the XP1 device report and ensure that the XP1 software is always up to date.
NOTE: To view the XP1 device reports and software updates from the web portal, you must be logged in to an ADMIN account.