CONNECTION POINTS

The XS1 has four cable connection points where you can connect your accessories to perform the exercises. The first two are slide connections located on the vertical positioners, each supporting 70 pounds of digital tension or a combined weight of 140 pounds. Never adjust the slide positions while the system is loaded. The remaining two are in the deck, supporting a combined 250 pounds of resistance. The deck connections can be found by sliding open the doors on either side of the force plate.

ACCESSORIES

BARBELL: The 14-pound barbell is designed to attach to both deck connections for exercises, such as bench press, squats, deadlifts, curls, and rows. 

MULTIFUNCTION BAR: The multifunction bar weighs three pounds and can be used for lat pull downs and rowing from the slide connections. 

HANDLES: Each handle can be individually attached to any connection point and can be used to perform single arm exercises or combined with another handle to work both arms simultaneously or in an alternating fashion. 

ROPE: The rope can be connected to either slide connections and used for chops, tricep extension, and certain row exercises. 

ANKLE STRAPS: The ankle straps are attached to the slide connections and are used for leg workouts, including abduction and adduction movements. 

WAIST HARNESS: The waist harness has two connection rings that can be attached to the deck or slide connections. The harness is great for exercises such as squats or weighted jumps. 

SKIHANDLES: The SkiHandles connect to both slide connections for SkiCross.

HYDROFIT ACCESSORIES

ROW BAR: The row bar has a central connection point and attaches to both slide connections.

ADJUSTABLE PADDLE: When extended, the adjustable paddle is used for paddleboard exercises or can be shortened for canoeing.

MULTIFUNCTION BAR: The multifunction bar is attached to both slide connections for kayak workouts. 

SURFSWIM PADDLES: Connect each SurfSwim paddle to the slide connections. Then, place your middle finger in the rubber loop of each paddle, and you are ready to dive in!

THE OXEDOT

The OxeDot is a wireless control device that can load and unload the digital tension on the XS1. Instead of pressing the "Load" button to start an exercise, use the OxeDot when the system is ready to start. Attach the OxeDot to any accessory and position it where you can easily press it throughout your exercise. A long press of the OxeDot will load tension. A quick press will unload.

MULTIFUNCTION BENCH

With the Flow and Peak accessory packages, you will receive a multifunction bench. It is approximately 53" long x 16" wide x 15" tall. The longer portion of the multifunction bench is the strength pad and can be used for strength-building exercises, like the bench press.

After removing the strength pad, the remaining seat can be used for rowing. Swing the footplate up and lock it into place by rotating the large knob until tight. The footplate also has two open brackets to hold the row bar. To unlock and ready the rowing seat, simply lift and rotate the knob 90º in either direction to lock it in an upright position. Position the bench so that it is aligned with the two deck markers. Lock the bench in place by screwing the two center knobs located in between the top and bottom portions of the bench into the two holes that are near the deck markers. Finally, deploy the rear kickstand.

To move the multifunction bench off the deck, lift the handle on one end until the wheels engage, then roll off.

THE FORCE PLATE

The force plate is the rectangular inset at the front of the deck. When conducting lifts, such as squats or deadlifts, stand on the force plate with both feet centered and equally spaced. When the balance meter is turned on, you will see real-time feedback of your center of balance to correct your form. 

PREPARING FOR USE

When you are ready to use your XS1, verify that the outer portion of each pedal is locked and sitting level with the floor. Lift the end of the deck to ensure the lock is engaged. 

VERTICAL STORAGE

If you choose to store the deck in an upright position, prepare the XS1 by disconnecting all accessories. Raise both slides to their highest position. Close both deck connection covers. Finally, step on the inner portion of each pedal to unlock it. After ensuring that no one else is near the device, especially small children and pets, grab the end of the deck and lift until it is fully vertical. 

THE USER INTERFACE

There are three main areas of the UI. First is the Home section, where you access workouts that you have created for yourself. Second is the Explore section, where you will find selectable OxeFit training classes with your favorite trainer, class type, and duration, as well as explore OxeFit-designed workouts and programs. The third section is Quick Start, where you can access an OxeFit library of over 250 pre-existing exercises or select freestyle to customize your own workout. In Freestyle mode, you can choose your connection point, accessory, and advanced exercise setting, along with setting your desired digital weight. Please refer to additional orientation programs as they become available that will provide greater depth on operating the user interface.

POWERING DOWN & SLEEP MODE

Finally, the ON/OFF button is located at the base of the kiosk. After your workout, there is no need to power down as the XS1 is designed to go into Sleep Mode to protect the screen while remaining available for software upgrades. To start your next workout, simply touch the screen to activate it. 

BEST PRACTICES

The XS1 is designed for use by only one person at a time. Keep others, especially small children and pets, away from the device. Digital weight can sometimes feel heavier than free weight, so the best practice is to start lighter than your expected strength and do several reps to get a better feel for digital tension. Another best practice is to ensure that your deck lifting movement is straight up and down. For optimum position, ensure proper foot placement on the force plate to create this purely vertical cable path. 

VIRTUAL SPOTTER

The XS1 has a lift assistance feature called Virtual Spotter, which will help you complete a lift if you are tiring. Virtual Spotter can be configured to assist your lifts. It is best practice to have this advanced feature turned on. There are two modes for Virtual Spotter: Gradual and Instant. When gradual mode is selected, the XS1 will progressively reduce the tension by up to 20 pounds when a struggle is detected until your lift is moving again. Conversely, if instant mode is selected, the XS1 will instantly unload all tension and end your set if it detects a struggle. As a reminder, the OxeDot can also unload digital weight whenever you are tired or want to end your set.

ADDITIONAL FEATURES

The XS1 has great monitoring features to detect unsafe barbell movements. If you rapidly tilt the barbell while lifting, the XS1 will unload the tension immediately. Another monitoring feature is called Stall Detection. If you stop for more than five seconds at the bottom of your range of motion or stop for 15 seconds at any portion of the lift, the system will unload and end the set immediately. 

For more information, please watch the XS1 orientation video here.

For any questions, please contact support@OxeFit.com.