Keeping your OxeFit XP1 unit(s) clean is essential for preventative maintenance and maintaining the overall aesthetics of your equipment and accessories. Proper care and cleaning will extend the life of your equipment and reduce premature aging and wear.
Caution: Always power off and unplug the XP1 before cleaning.
- Barbell should be wiped down after each use and cleaned daily with a mild soap and water mix or an approved antibacterial cleaner.
- Hand grips should be cleaned daily with a mild soap and water mix or a non-abrasive, gentle, and antibacterial cleaner.
- If the bench was used for a workout, upholstery on the bench pads should be cleaned daily with a mild soap and water mix or a non-abrasive, gentle antibacterial cleaner.
- The main frame should be cleaned weekly with a mild soap and water mix and dampened cloth or a gentle antibacterial cleaner to remove all dust and accumulated contaminants.
Note: DO NOT use cleaners that contain solvents, alcohol, or abrasives.
Article is closed for comments.